Reinforced Bollards

Reinforced bollards


RSJ inside 114mm o.d plain steel bollard.	Loose cap for concrete bollards filled with concrete on site

SUMMARY

All mild steel and stainless steel bollards from AUTOPA are available with additional cores inside as reinforcement. RSJ's are also available for any ragged 114mm and 168mm diameter fixed bollard (not available for removable bollards). The steel cores are galvanised mild steel.

The most common way to reinforce standard bollards is for them to be filled with concrete during installation and supplied with a loose cap.

The other option for reinforced bollards is for them to have an RSJ or internal steel core inside. The table below is a list of options available. Only available for ragged bollards.

The steel cores are supplied with no cap to allow for filling with concrete if required. It is recommended the RSJ and steel cores are set between 500mm - 600mm below ground.

Diameter mm	Core size mm	RSJ available Y/N
Galv. mild steel
101	90
114	90	Y
127	114
139	114
152	139
168	139	Y
193	168
219	193

Diameter mm	Galv Core size mm	Galv Core length 1200 mm	Galv Core length 1000 mm
Stainless steel
101	90	Y	Y
114	90	Y	Y
129	114	Y	N
139	114	Y	N
154	139	Y	N
168	139	Y	N
204	193	Y	N