Sprung Boundary Posts


Sprung Boundary post, galvanised	Sprung Boundary post, ragged	Sprung Boundary post, colour coated finish

SPECIFICATION

Available ragged for casting in or flanged for bolting down.
Spring allows bollard to return to positionafter light impact.
Will spring approx 30 degrees from the vertical.
Weather cap of black polypropylene.
Chain and eyelets available extra.
Steel all galvanised to BS EN ISO1461.

Finishes: for all posts galvanising is standard, colour coated options are extra.

Model	Part no. Galv.	Height above ground	Diameter	Wall thickness	Gross weight
Sprung Boundary Post, ragged	138100503	750	48mm	3.25mm	3.5kg
Sprung Boundary Post, flanged	138100403	750	48mm	3.25mm	3.5kg

INSTALLATION

Flanged posts should be bolted on to a suitable existing surface, preferably concrete (bolts available extra). Ragged posts should be cast intp a concrete foundation approx 300mm cube. The ragged ends ensure a good anchorage into concrete.

Flanges require 3 qty 12mm bolts. The flange plate is approx 6mm thick, 134mm diameter.
Ragged version is 240mm below ground and is splayed for firm ground anchorage.

Recommended centres for posts to prevent vehicle access is 1.3m.