INTRODUCTION
Welcome to the Autopa products pages.
To view products in our range online, please start by choosing a product group from the left menu.
Click to see our new product
Please do not hesistant to contact us if you have any queries or would like to request a copy of our latest product brochure.
You can also download an electronic PDF of our latest brochure.
Information relevant to all Autopa products can be found below.
COLOUR & FINISHING OPTIONS
Many items in our range can be painted or coated. All steel products are galvanised unless otherwise stated. All galvanising is to BS EN ISO 1461.
Painting:- Most painting is effected inhouse within our own painting booth. Most RAL & BS colours are available, but please always check with our sales office. Very small quantities are often uneconomic for both us and the customer.
Polyester and Plastic PPA coating are subcontracted operations to specialist coaters. Polyester powder coating is a spray process.
Plastic coating is a dipping process and is normally Plascoat PPA 571 - a very high quality and extremely durable finish. Various BS & RAL colours are available. Please enquire.
INSTALLATION ADVICE
Installation service, Site surveys, and quotations are available in most areas of the U.K.
- Full installation instructions accompany all products where applicable.
- To install, most items will normally require some form of breaker or drill, depending on site conditions. The stronger the foundation you can lay, the better. Site conditions will dictate the size and type of foundation.
- To prevent vehicle access, gaps between posts/bollards should be no larger than 1 .2-1 .3 metres.
- Chain should not be allowed to span more than approx. 4 metres length.
When working outside we recommend the following:-
- Secure the site from pedestrians and vehicles, where applicable, by use of high visibility tape, barriers, cones, safety lamps etc. Ensure you are familiar with statutory regulations, especially if working in a 'public' area.
- When drilling or cutting, wear protective goggles and suitable clothing.
- Wear strong protective gloves.
- Wear a safety helmet.
- Ensure your power supply is secure and in a safe dry location.
- Beware of any possible underground services - gas, water, electricity etc.
MAINTENANCE
All products outdoors need occasional cleaning & maintenance. Clean with a mild detergent, cloth & water. Lubricate locks. Clear away all dirt, debris, leaves etc.
APPLICABLE STANDARDS
SG iron is to
BS EN 1563 (1997)
Grade 420-12.
Whiteheart malleable iron is to BS EN 1562
(1997)
Grade W40.05.
All small diameter tube up to 48mm o.d. is
to BS 1387: 1985.
76mm ∓ 168mm diameter tube also to BS
1387 :1985.
Diam 64mm tube is to BS8232/5: ERW 1.
Diam. 114/139/165/193mm tube is to
BS6363 (1983) Steel Grade 43/36.
Diam. 101/127 to BS 6323/5 1982 ERW
1KM.
Galvanising is to
BS EN ISO 1461 (1999).