Automatic bollards


Stainless steel finish	Painted finish	Stainless steel finish

SUMMARY

Autopa’s new bollards are fully automated and suitable for a variety of applications, for reserving spaces, access control, control of limited vehicle traffic and pedestrian zones and anti-intrusion variations are also available.

Recommended Uses include: Private vehicle entrances accesses, Company vehicle entrance accesses, Industrial vehicle accesses, Commercial vehicle entrances, and Warehousing facilities among others.

The Automatic bollards can be configured with a variety of optional extras to suit installation requirements.
Access control options include:
Radio transmitters
Key fobs
Numerical transmitters
Timers

Designed for intensive use.
Standard finish is anthracite grey (painted).
Other colours are available - RAL numbers must be specified.
Stainless steel finish is available (satin finish).

SPECIFICATION

Diameter: 127 or 275mm.
Height available: 600, 800mm.
Wall thickness. 6mm
Raising speed: 10 seconds
Lowering speed: 10 seconds
Impact resistance: 9,000 J
Breakout resistance: 120,000 J (180,000 J reinforced version)
Variations are available on the 275mm diameter bollard to increase strength (including anti-terror).

Model	Overall diameter mm	Height above ground mm	Wall thickness
127/P 600	127	600	6
127/P 800	127	800	6
275/P 600	275	600	6
275/P 800	275	800	6

Control Systems

Induction Loop and Vehicle detectors

Inductive loop detectors or photoelectric cell systems control the barrier by detecting vehicles. Inductive loops detect the interactive field change of a vehicle as it passes over its wound cable ‘loop’. Photoelectric cells use a reflective beam, ‘sensing’ an object when the beam is broken.

Remote Controls

Push buttons and switches provide easy local control of the barrier, for barrier systems that are permanently manned. Alternatively a keyswitch can be fitted to the barrier cabinet with control override raise & lower comands (key may be removed at any position).

Card Technology

Magnetic stripe and proximity card technologies provide the ideal solution for controlling access for a large number of users. Each card is encoded with a site code and an individual number, providing very secure access control and easy system management. Timed allocation and capture (Magnetic stripe only) systems are also available

Intercom/Video

Intercom systems provide easy remote verification before allowing visitor access. The only effective system for providing visitor access to a site. Site Surveys are advised for all automatic systems to ensure correct, safe operation and the most suitable control combinations are selected. Suitable signage is recommended to ensure drivers and pedestrians are aware of automatic barrier operation. Safe provision should always be allowed for pedestrians where required.

Installation

All automatic products must be installed by approved installers.