Column protectors & Corner protection hoop


ACP1	ACP2	ACP3


ACP4	ACP5	ACP6

Corner Protection Hoop - CPH

SUMMARY

A variety of Column Protectors have been designed by Autopa to suit all types of columns, posts and corners. Suitable for external use and inside warehouses. Corner protection hoops are also available.

SPECIFICATIONS - Column protectors

Ragged for casting in as standard, flanged for bolting down is available on request (bolts extra).
Made of mild steel tube and section.
ACP5 has black plastic cap on top of uprights, other column protectors have welded steel caps.
Galvanised finish as standard.
A variety of colour coated finishes are available on request (extra).
Reflective tape also available in various colours (extra).
ACP’s 5 & 6 are also available in stainless steel.
All ragged column protectors are 250mm below ground.

SPECIFICATIONS - Corner protection hoops

Ragged for casting in as standard, Flanged for bolting down is available on request (bolts extra).
Made of galvanised mild steel tube.
76mm diameter tube.
Galvanised finish as standard.
A variety of colour coated finishes are available on request (extra).
Reflective tape also available in various colours (extra).
Ragged version is 250mm below ground.

Model	Part no. Galv finish	height above ground	Outside width	Inside width	Internal clearance to back	Uprights od	Horizontal od
ACP1	138177710	900mm	580mm	420mm	460mm	80x80mm	64mm
ACP2	138177720	910mm	560mm	440mm	530mm	64x64mm	48mm
ACP3	138177730	500mm	480mm	460mm	250mm	80x80mm	64mm
ACP4	138177740	900mm	510mm	380mm	350mm	64mm	48mm
ACP5	138177750	500mm	510mm	380mm	350mm	64mm	48mm
ACP5 Stainless	138177800	500mm	510mm	380mm	350mm	64mm	48mm
ACP6 Stainless	138177850	185mm	320mm	224mm	115mm	48mm	48mm

Model	Part no. Galv finish	Height above ground	Outside width	Inside width
CPH, ragged	138177760	500mm	700x700mm	624mm
CPH, ragged	138177770	1000mm	700x700mm	624mm

Installation

For ragged ends a concrete foundation approx. 300mm cube is recommended for each leg, depending on ground conditions.
For flanged ends, a suitable surface, preferably concrete should already exist for drilling into and bolting down.