Trolley Bays & Shelters

Trolley Bays

Galvanised Trolley Bay	Stainless steel Trolley Bay

SUMMARY

Trolley Bays are made up to individual perimeter barriers, they can be made to any size to suit customer requirements. Commonly trolley rails are 800mm above ground and are available with extra central rail approx 200mm above ground. Ragged trolley rails are 300mm below ground.

The modular nature of the rails allow a variety of configurations to be available. Using 1no 1.9m with 6no 1.5m rails, a trolley park can be made to fit an avaerage parking space or approx 2x4.5m as shown by the above galvanised Trolley bay.

SPECIFICATIONS

• Made of mild steel tube.
• Galvanised finish as standard.
• Tube diameter 48, 64 & 76mm.
• Individual barriers available up to 2500mm.
• Stainless steel is also available in 48mm od.
• Available ragged for casting in or flanged for bolting down.

Trolley Shelters

Trolley shelter	Trolley shelter side view

SUMMARY

The Autopa Trolley Shelter is designed to fit in a standard car parking space. The shelters are also available with back to back extension bays. Made from mild steel frame and 5mm PET sheeting supported every metre for added strength and durability.

SPECIFICATIONS

• Single shelter is suitable for approx 36 standard trolleys.
• Framework 60x40mm mild steel hollow section, galvanised finish.
• All steel parts are galvanised to BS EN 1461:1999.
• 5mm clear PET sheeting.
• Steeting externally fixed to frame and retained by clamping strips.
• Galvanised finish is standard.
• Colour coated finishes are available extra.
• Adjustable flanged feet for bolting down (bolts are available extra).
• 2233mm overall height.
• 2208mm overall width.
• 4221mm overall length.
• Lower rail is 750mm above ground.