Automatic Rising Bollard (Diameters 127 or 275mm)
Designed to control the access of vehicles to residential areas and commercial properties, AUTOPA’s Automatic Bollards are manufactured from high quality stainless or galvanised steel. These bollards are available in diameters of 127mm or 275mm and heights of 600mm or 800mm to suit customer needs.
All AUTOPA Automatic Bollards are compatible with a variety of different control mechanisms including remote controls, keypads and swipe cards. AUTOPA recommends that bollards are placed no further than 1,200mm apart to ensure no vehicle may pass between them.
- Designed for intensive use.
- Standard finish is anthracite grey (painted).
- Other colours are available - RAL numbers must be supplied.
- Stainless steel finish is available (Satin finish).
- Diameter: 127mm or 275mm
- Height available: 600mm, 800mm
- Wall thickness: 6mm
- Raising speed: 15cm/second
- Lowering speed: 25cm/second
- Impact resistance: 40,000J
- Breakout resistance: 250,000J reinforced version
- Induction Loop and Vehicle detectors
Inductive loop detectors or photoelectric cell systems control the barrier by detecting vehicles. Inductive loops detect the interactive field change of a vehicle as it passes over its wound cable ‘loop’. Photoelectric cells use a reflective beam, ‘sensing’ an object when the beam is broken.
- Remote Controls
Push buttons and switches provide easy local control of the barrier, for barrier systems that are permanently manned. Alternatively a keyswitch can be fitted to the barrier cabinet with control override raise & lower commands (key may be removed at any position).
- Card Technology
Magnetic stripe and proximity card technologies provide the ideal solution for controlling access for a large number of users. Each card is encoded with a site code and an individual number, providing very secure access control and easy system management. Timed allocation and capture (Magnetic stripe only) systems are also available
Intercom systems provide easy remote verification before allowing visitor access. The only effective system for providing visitor access to a site. Site Surveys are advised for all automatic systems to ensure correct, safe operation and the most suitable control combinations are selected. Suitable signage is recommended to ensure drivers and pedestrians are aware of automatic barrier operation. Safe provision should always be allowed for pedestrians where required.
- Other access control systems are available, please ask for more information